The Catalogue of Instalations

References for comments. Installation ВДИ-10.

Sat, 09 Apr 2011 07:36:52 GMT

The engineering documentation of

ВДИ-10

Installation for continuous dosing of ingredients.

The installation ВДИ-10 is destined for continuous dosing of ingredients. The concept of the installation is based on the principles "HI TECH” and "Know-How”, which enables a considerable reduction in time, energy and ingredient consumption during treatments of must and wine materials. The yield of the clarified product is considerably increased due to a thicker sediment whose volume becomes twofold lower. The wine material to be treated becomes limpid, which leads to a dramatic reduction in filtering aid consumption.

Specifications

Feed                                                        10 m³/h
Pressure                                                  0.25 МПа
Number of ingredients
to be dosed simultaneously                    2
Feed of first dosing pump                       0.50 dm³/h
Feed of second dosing pump                  0.500 dm³/h
Installed power                                       2.2 kWt
Overall dimesions, mm                          1200х600х920
Weight, kg                                 230

    The use of the installation in treating wine materials enables an increased term of guaranteed stability to colloidal clouds, up to 2.5-3 years, for all types of wines.

References for comments. Pump ВНПБ- 10/32

Sun, 19 Dec 2010 10:02:54 GMT

The engineering documentation of

ВНПБ-10/32

The installation (on a movable carrieage) is destined for pimping-over of wines, juices, musts, lees and other liquids.

The installation ВНПБ-10/32 has been designed and manufactured to make the product to be pumped over as little affected by the process as possible. The design factors of the cylinder and piston of the pump have been optimized to enable as large and homogeneous flow as possible, larger self-suction lift, lower "neutral” space and a dramatic reduction both in oxidation of the product and in loss of its aromatic qualities. The use of the confrod-free drive instead of the conventional crank drive underlies these advantages.

The installation (on a movable carriage) is destined for pimping-over of wines, juices, musts, lees and other liquids.

Specifications

Feed                                           10 m³/h
Pump head                                 0,32 MPa
Admissible vacuometric
suction height                            4 m
Double strokes per min            70
Piston stroke length                  0.18 m
Piston diameter                         0.11 m
Installed power                          2.2 kWt
Efficiency factor                        40%
Overall dimensions                   1100х450х950 mm
Weight, kg                                 170

     The installation is manufactured mostly of stainless steel 12*18 Н and bronze Бр05Ц5С5.

Reference for comments. Pumps ВНЦ-20/20M and ВНЦ-40/20М

Sun, 19 Dec 2010 10:00:42 GMT

The engineering documentation of

ВНЦ-20/20M

ВНЦ-40/20М

Centrifugal pumps for pumping-over of wine materials.

Specifications

                                           ВНЦ-20/20М          ВНЦ-40/20М

Feed, at lеast                             20 m³/h                       40 m³/h
Pump head                                 20 m±2,0                     20 m ±1,0
Installed power of
electric motor                     3.0 kWt                      5.5 kWt
Line voltage                       380 V                          380 V
Ovarall
dimensions, mm                     1140х370х870           1160х370х870
Weight, kg                                  90                               120

Reference for comments. Pump ВНПБ-32/32.

Sun, 19 Dec 2010 09:57:43 GMT

The engineering documentation of

ВНПБ-32/32

Pump on a movable carriage for pumping-over of grape crush.

Pump ВНПБ-32/32 on a movable carriage for grape crush pumping-over.
The installation ВНПБ-32/32 has been designed and manufactured to make the product to be pumped over as little affected by the process as possible. The design factors of the cylinder and pison of the pump have been optimized to enable as large and homogeneous flow as possible, larger self-suction lift, lower "neutral” space and a dramatic reduction both in oxidation of the product and in loss of its aromatic qualities. The use of the confrod-free drive instead of the conventional crank drive underlies these advantages.

Specifications

Feed, m3/h                                            32
Pressure, mPa                                     0.32
Installed power, kWt                          7.5
Weight, kg                                           450

    A stationary version of the installation can be manufactured to order for replacing the pump ПМН-28 for grape crush.

Reference for comments. Installation УСБ- 05.

Sun, 19 Dec 2010 09:52:12 GMT

The engineering documentation of

УСБ- 05

The installation is destined for cold bentonite slurry preparation.

The installation is destined for cold bentonite slurry preparation without the use of steam, the whole process taking a total of 3-5 min. The product resulting from the process does not separate or spoil for 4-5 years. The average particle size of bentonite slurry is 6 mcm. The use of the installation enables a 5-6fold reduction of the bentonite dose to be applied in treatments of wine materials. Theoretical achievements beyond the world level underlie the concept of the installation. The principles "HI-TECH" and "Know-How" have been used in the development of the installation, leading to considerably reduced energy consumption and improved quality of final bentonite slurry:

Specifications

Bentobite slurry preparation time, min               3-10
Bentonite slurry homogeneity, %                           100
Tank capacity, m³, at least 0.12
Installed power of electric motors, kWt                  3.55
Space required, m³                                      0.78
Overal dimensions, mm, at most
length                                                                        1300
width                                                                          600
height                                                                        1500
Weight, kg, at most                                                  120

Reference for comments. Pump ВНЦ-УМ-10/65.

Sun, 19 Dec 2010 09:45:12 GMT

The engineering documentation of

ВНЦ-УМ-10/65

The installation is destined for kitting-up of filter-presses.

Feed - 10 m³/h
Pump head – up to 60 m water column

The use of the installation considerably reduces filter-cardboard consumption.

Reference for comments. Installation for cavitation processing of yeast mass with a view to prepare autolysates.

Sun, 19 Dec 2010 09:23:31 GMT

The engineering documentation of

Installation for cavitation processing of yeast mass with a view to prepare autolysates.

The installation is to be incorporated into the process flowsheet of yeast autolysate preparation as major technological element as well as for preparing bentonite slurry in technological treatments of grape must and wine materials for the purpose of their clarification and stabilization.

The work cycle to produce yeast autolysates is as follows: processing of yeast mass in the installation → seasoning of processed yeast mass in the tank for 10 days (to obtain a concentrated yeast autolysate) or addition of yeast mass immediately after the processing to a wine material at a suitable dose with a subsequent seasoning for 10 days (this enbles a reduction in protein mass-concentration of the wine material due to the effect of active proteolytic enzymes). As a results, the wine material becomes enriched with products of yeast autolysis.

Specifications

Yeast must processing time, min                           10-15
Yeast mass concentration, %                  up to 50
Tank capacity, m³                                                 0.12
Yeast cell death percentage per day, %               100
Duration of technological cycle of yeast

autolysate production in any

         physiological condition of yeast, days          10-15
Bentonite slurry preparation time, min                 1-3
Bentonite slurry concentration, %,
          aqueous bentonite slurry                              up to 20
          wine bentonite slurry

         (without loss of fluidity)                                 up tp 40
Installed power, kWt                                              7.0
Weight, kg                                                               140
Average service life, years at least                       8

     The installation is manufactured mostly of stainless steel.
Special features: A disintegrator of special design enters as the working organ of the installation. During the cyclic pumping-over of the product, it enables the latter to be processed in the cavitaion regime. This guarantees yeast mass inactivation and bentonite slurry activation.
     No foreign or home-made devices similar to the installation are known. It enables complete yeast autolysis and improves quality of champagne-type and sparkling wines, table and fortified wines and brandy spirits.